port 1/1/7 description "sr12.lab:1/1/3" ethernet mode hybrid encap-type dot1q mtu 9000 lldp dest-mac nearest-bridge notification tx-tlvs port-desc sys-name sys-desc sys-cap tx-mgmt-address system port-id-subtype tx-if-name exit exit exit no shutdown router interface "system" address 10.0.0.250/32 no shutdown exit interface "sr15:1/1/7-to-sr12:1/1/3" address 10.0.0.192/31 port 1/1/7:0 no shutdown exit isis interface "sr15:1/1/7-to-sr12:1/1/3" level-capability level-2 interface-type point-to-point level 2 hello-interval 10 metric 10000000 exit no shutdown exit exit mpls interface "sr15:1/1/7-to-sr12:1/1/3" no shutdown exit exit ldp session-parameters peer 10.0.0.251 # sr12.lab fec-type-capability p2mp disable prefix-ipv6 disable exit exit exit tcp-session-parameters peer-transport 10.0.0.251 # sr12.lab authentication-key "xxxxxxxxxxxxxxxxxxxxxx" hash2 exit exit interface-parameters interface "sr15:1/1/7-to-sr12:1/1/3" ipv4 fec-type-capability prefix-ipv6 disable p2mp-ipv4 disable p2mp-ipv6 disable exit no shutdown exit no shutdown exit exit targeted-session peer 10.0.0.251 # sr12.lab no shutdown exit exit no shutdown exit port 3/1/20 description "Ixia:5/10" ethernet mode access access exit encap-type qinq mtu 1804 exit no shutdown exit qos sap-ingress 10101 create description "Ingress Policer 100Mbps" queue 1 create exit queue 11 multipoint create exit policer 1 create rate 100000 cir 100000 exit fc "af" create policer 1 exit default-fc "af" service customer 120 create description "Test" exit sdp 251 mpls create description "sr12.lab" far-end 10.0.0.251 ldp path-mtu 2000 keep-alive shutdown exit no shutdown exit epipe 10101 customer 120 create description "100M Active/Standby" service-mtu 1800 service-name "100M - Active" endpoint "Local" create exit endpoint "Remote" create standby-signaling-slave exit sap 3/1/20:101.* endpoint "Local" create description "100M Active" ingress qos 10101 exit no shutdown exit spoke-sdp 251:1 endpoint "Remote" create description "100M Active sr15.lab:sr12.lab" precedence primary no shutdown exit spoke-sdp 251:2 endpoint "Remote" create description "100M Standby sr15.lab:sr12.lab" exit precedence 1 no shutdown exit no shutdown exit exit