port 1/1/25 description "To sr12.lab:1/1/2" ethernet mode hybrid access exit encap-type dot1q mtu 9000 exit exit router interface "system" address 10.0.0.224/32 no shutdown exit interface "as101:1/1/25-to-sr12:1/1/2" address 10.0.0.195/31 port 1/1/25:0 no shutdown exit isis interface "as101:1/1/25-to-sr12:1/1/2" level-capability level-2 interface-type point-to-point level 2 hello-interval 10 metric 10000000 exit no shutdown exit exit mpls interface "as101:1/1/25-to-sr12:1/1/2" no shutdown exit exit ldp peer-parameters peer 10.0.0.251 # sr12.lab exit exit interface-parameters interface "as101:1/1/25-to-sr12:1/1/2" exit exit targeted-session peer 10.0.0.251 # sr12.lab exit exit no shutdown exit port 1/1/17 description "To Ixia:5/1" ethernet mode access access exit encap-type null mtu 1800 no autonegotiate exit no shutdown exit qos sap-ingress 10101 create description description "Ingress Policer 100Mbps" num-qos-classifiers 32 # This could probably be 2 meter 1 create mode trtcm2 adaptation-rule cir max pir max rate cir 100000 pir 100000 exit exit eth-cfm domain 1 format none level 1 association 1 format icc-based name "251:1 sr12" bridge-identifier 10101 exit remote-mepid 2 # sr12.lab exit association 2 format icc-based name "251:2 sr12" bridge-identifier 10101 exit remote-mepid 2 # sr12.lab exit exit domain 2 format none level 2 association 1 format icc-based name "251:1 sr15" bridge-identifier 10101 exit remote-mepid 1 # sr15.lab exit association 2 format icc-based name "251:2 sr15" bridge-identifier 10101 exit remote-mepid 1 # sr15.lab exit exit exit service customer 101 create description "Test" exit sdp 251 mpls create description "sr12.lab" far-end 10.0.0.251 ldp path-mtu 2000 keep-alive shutdown exit no shutdown exit epipe 10101 customer 101 svc-sap-type any create description "100M Active/Standby" service-mtu 1800 service-name "100M - Active/Standby" endpoint "Local" create exit endpoint "Remote" create standby-signaling-master exit sap 1/1/17 endpoint "Local" create description "100M Active" ingress qos 10101 exit egress exit exit spoke-sdp 251:1 endpoint "Remote" create description "100M Active as101.lab:sr12.lab" eth-cfm mep 3 domain 1 association 1 direction down description "as101.lab:sr12.lab" eth-test-enable bit-error-threshold 0 exit ccm-enable one-way-delay-threshold 0 no shutdown exit mep 3 domain 2 association 1 direction down description "as101.lab:sr15.lab" eth-test-enable bit-error-threshold 0 exit ccm-enable one-way-delay-threshold 0 no shutdown exit mip exit precedence primary no shutdown exit spoke-sdp 251:2 endpoint "Remote" create description "100M Standby as101.lab:sr12.lab" eth-cfm mep 3 domain 1 association 2 direction down description "as101.lab:sr12.lab" eth-test-enable bit-error-threshold 0 exit ccm-enable one-way-delay-threshold 0 no shutdown exit mep 3 domain 2 association 2 direction down description "as101.lab:sr15.lab" eth-test-enable bit-error-threshold 0 exit ccm-enable one-way-delay-threshold 0 no shutdown exit mip exit precedence 1 no shutdown exit no shutdown exit exit saa test "251:1-AS101.lab-SR12.lab" type # MAC from SR12.lab "system" / loopback interface eth-cfm-two-way-delay 00:1a:f0:ae:ca:ad mep 3 domain 1 association 1 count 10 exit continuous no shutdown exit test "251:1-AS101.lab-SR15.lab" type # MAC from SR15.lab "system" / loopback interface eth-cfm-two-way-delay 0c:a4:02:1c:78:01 mep 3 domain 2 association 1 count 10 exit continuous no shutdown exit test "251:2-AS101.lab-SR12.lab" type # MAC from SR12.lab "system" / loopback interface eth-cfm-two-way-delay 00:1a:f0:ae:ca:ad mep 3 domain 1 association 2 count 10 exit continuous no shutdown exit test "251:2-AS101.lab-SR15.lab" type # MAC from SR15.lab "system" / loopback interface eth-cfm-two-way-delay 0c:a4:02:1c:78:01 mep 3 domain 2 association 2 count 10 exit continuous no shutdown exit exit