DSLAM/MALC - Adding Line Cards

Adding a 48 port ADSL line card

# View the line cards in chassis. The DSL card is NOT_PROVISIONED
slots

TEST-ZHONE-MALC slots
Uplinks
 1: MALC FEGE RPR (RUNNING)

Cards
 3: MALC NTN/EFM GSHDSL Bonded/with NT (RUNNING)
15: MALC XDSL 48 ANNEX A/M/with 900 Ohm Splitter (NOT_PROV)


# Viewing the line card profiles also confirms there is no card-profile for this line card...

TEST-ZHONE-MALC list card-profile
card-profile  1/1/5091
card-profile  1/3/5074
2 entries found.


# View more details of the newly inserted DSL card

TEST-ZHONE-MALC slots 15
Type            : MALC XDSL 48 ANNEX A/M
Sub-Type        : with XDSL SPLT ANXA 900 Ohm
Card Version    : 800-02842-02-D
EEPROM Version  : 1
Serial #        : XXXXXXX
CLEI Code       : No CLEI
Card-Profile ID : 1/15/5065
Shelf           : 1
Slot            : 15
ROM Version     : MALC CAN 1.12.3.93356
Software Version: unavailable
State           : NOT_PROV
Mode            : NONE
Heartbeat check : enabled
Heartbeat resp  : 0
Heartbeat late  : 0
Hbeat seq error : 0
Hbeat longest   : 0
Fault reset     : enabled


# Enable the new card

TEST-ZHONE-MALC card add 15
new card-profile 1/15/5065 added, sw-file-name "malcxdsl48anxam.bin"
maxvpi-maxvci set to default of vpi15-vci63 for this card type



# Now we can see the chassis is loading the software into the card. 

TEST-ZHONE-MALC  slots
Uplinks
 1: MALC FEGE RPR (RUNNING)

Cards
 3: MALC NTN/EFM GSHDSL Bonded/with NT (RUNNING)
15: MALC XDSL 48 ANNEX A/M/with 900 Ohm Splitter (LOADING)



# Now the card is online.

TEST-ZHONE-MALC  slots
Uplinks
 1: MALC FEGE RPR (RUNNING)

Cards
 3: MALC NTN/EFM GSHDSL Bonded/with NT (RUNNING)
15: MALC XDSL 48 ANNEX A/M/with 900 Ohm Splitter (RUNNING)


TEST-ZHONE-MALC slots 15
Type            : MALC XDSL 48 ANNEX A/M
Sub-Type        : with XDSL SPLT ANXA 900 Ohm
Card Version    : 800-02842-02-D
EEPROM Version  : 1
Serial #        : XXXXXXX
CLEI Code       : No CLEI
Card-Profile ID : 1/15/5065
Shelf           : 1
Slot            : 15
ROM Version     : MALC CAN 1.12.3.93356
Software Version: MALC 1.16.4.327
State           : RUNNING
Mode            : FUNCTIONAL
Heartbeat check : enabled
Heartbeat last  : SAT JAN 01 04:21:01 2000
Heartbeat resp  : 8428
Heartbeat late  : 0
Hbeat seq error : 0
Hbeat longest   : 17
Fault reset     : enabled
Uptime          : 2 hours, 26 minutes



TEST-ZHONE-MALC list card-profile
card-profile  1/1/5091
card-profile  1/3/5074
card-profile  1/15/5065
3 entries found.







1941#show inventory
NAME: "CISCO1941/K9", DESCR: "CISCO1941/K9 chassis, Hw Serial#: XXXXXXXXXXX, Hw Revision: 1.0"
PID: CISCO1941/K9      , VID: V04 , SN: XXXXXXXXXXX

NAME: "4 Port FE Switch on Slot 0 SubSlot 0", DESCR: "4 Port FE Switch"
PID: HWIC-4ESW         , VID: V01 , SN: XXXXXXXXXXX

NAME: "ADSL/VDSL over POTS Annex M supporting ADSL1, ADSL2, ADSL2+ and VDSL2 on Slot 0 SubSlot 1", DESCR: "ADSL/VDSL over POTS Annex M supporting ADSL1, ADSL2, ADSL2+ and VDSL2"
PID: EHWIC-VA-DSL-M    , VID: V01 , SN: XXXXXXXXXXX

NAME: "C1941/C2901 AC Power Supply", DESCR: "C1941/C2901 AC Power Supply"
PID: PWR-1941-2901-AC  , VID:    , SN:




1941#conf t
Enter configuration commands, one per line.  End with CNTL/Z.

1941(config)#int atm0/1/0
1941(config-if)#no shut
*Jan 16 2015 11:49:26.663 GMT: %LINK-3-UPDOWN: Interface ATM0/1/0, changed state to down
*Jan 16 2015 11:49:34.019 GMT: %SYS-5-CONFIG_I: Configured from console by cons       *Jan 16 2015 11:49:35.351 GMT: %LINK-3-UPDOWN: Interface ATM0/1/0, changed state to up
*Jan 16 2015 11:49:36.351 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0/1/0, changed state to up





1941#show controllers VDSL 0/1/0
Controller VDSL 0/1/0 is UP

Daemon Status:           Up

                        XTU-R (DS)              XTU-C (US)
Chip Vendor ID:         'BDCM'                   'GSPN'
Chip Vendor Specific:   0x0000                   0x0010
Chip Vendor Country:    0xB500                   0xFFB5
Modem Vendor ID:        'CSCO'                   '    '
Modem Vendor Specific:  0x4602                   0x0000
Modem Vendor Country:   0xB500                   0x0000
Serial Number Near:    XXXXXXXXXXX 1941/K9 15.3(3)M3
Serial Number Far:
Modem Version Near:    15.3(3)M3
Modem Version Far:     0x0010

Modem Status:            TC Sync (Showtime!)
DSL Config Mode:         AUTO
Trained Mode:            G.992.5 (ADSL2+) Annex A
TC Mode:                 ATM
Selftest Result:         0x00
DELT configuration:      disabled
DELT state:              not running
Trellis:                 ON                       ON
SRA:                     disabled                        disabled
 SRA count:              0                       0
Bit swap:                enabled                         enabled
 Bit swap count:         0                       0
Line Attenuation:         2.0 dB                  0.0 dB
Signal Attenuation:       2.9 dB                  9.5 dB
Noise Margin:             6.1 dB                  9.5 dB
Attainable Rate:        25012 kbits/s            1056 kbits/s
Actual Power:            16.1 dBm                 7.4 dBm
Total FECC:             0                        0
Total ES:               0                        0
Total SES:              0                        0
Total LOSS:             0                        0
Total UAS:              7435                     7435
Total LPRS:             0                        0
Total LOFS:             0                        0
Total LOLS:             0                        0

Full inits:             1
Failed full inits:      0
Short inits:            0
Failed short inits:     0

Firmware        Source          File Name (version)
--------        ------          -------------------
VDSL            embedded        VDSL_LINUX_DEV_01212008 (1)

Modem FW  Version:      130205_1433-4.02L.03.A2pv6C035j.d23j
Modem PHY Version:      A2pv6C035j.d23j
Vendor Version:         Ap6v35j.23j 68


                  DS Channel1     DS Channel0   US Channel1       US Channel0
Speed (kbps):             0            23896             0              1023
SRA Previous Speed:       0                0             0                 0
Previous Speed:           0                0             0                 0
Total Cells:              0        105186836             0           4438232
User Cells:               0                0             0                 0
Reed-Solomon EC:          0                0             0                 0
CRC Errors:               0                0             0                 0
Header Errors:            0                0             0                 0
Interleave (ms):       0.00             0.08          0.00              0.24
Actual INP:            0.00             0.00          0.00              0.00

Training Log :  Stopped
Training Log Filename : flash:vdsllog.bin

---